The TCS01 is a low cost yet highly functional thermostat controller. With this module you can intelligently control power to most types of electrical device based on the temperature sensed by the included highly accurate NTC temperature sensor.
Although this module has an embedded microcontroller, no programming knowledge is required. Three push button switches allow for configuring various parameters including on & off trigger temperatures. The on board relay can switch up to a maximum of 5A at 240V AC or 10A at 12V DC. The current temperature is displayed in degrees Celsius via its 3 digit seven segment display and the current relay state by an on board LED.
This module uses on-board non-volatile memory to store changes made to its settings. Therefore any changes made will be saved even if power is removed from the module.
The datasheet and operating manual for this module can be found HERE.
Temperature Control Range: -50 to 110 ̊C
Resolution between -9.9 and 99.9: 0.1 ̊C
Resolution at all other temperatures: 1 ̊C
Measurement Accuracy: 0.1 ̊C
Control Accuracy: 0.1 ̊C
Refresh Rate: 0.5 Seconds
Input Power (DC): 12V
Measuring Inputs: NTC (10K 0.5%)
Waterproof Sensor: 0.5M
Output: 1 Channel Relay Output, Capacity: 10A
48mm x 40mm x 14mm
Verified review - view original