Showing 181–198 of 198 resultsSorted by popularity
-
New narrowband 36mm filter
ر.ع.195.140 Add to cartSize: D=36mm
Thickness: 2mm
Narrowband 36mm filter do not eliminate the effects of light pollution or increase the object’s brightness. In many cases, they increase the contrast between nebula and night sky, not brightening the nebula.
It can reduce the transmission of certain wavelengths of light, specifically those produced by artificial light including mercury vapor, and both high and low pressure sodium vapor lights and the unwanted natural light caused by neutral oxygen emission in our atmosphere (i.e. skyglow).
-
StarFi Wi-Fi Adapter
ر.ع.54.900 Add to cartConvert your telescope mount into a wirelessly controllable one with this new the new StarFi Wi-Fi adapter
-
New LRGB Filters Optimized for ASI1600
ر.ع.60.300 Add to cartThe new ZWO LRGB Filters are designed to approximately equalize the flux of ASI1600 mono sensor
Better transmission, Better coating, Better color separation
-
New narrowband 1.25″ filter
ر.ع.150.100 Add to cartThe ZWO New Narrowband Filter Set is a must-have for astrophotographers looking to capture stunning images of emission nebulae. This filter set includes three filters: H-alpha, OIII, and SII. Designed with high-quality materials and anti-reflection coatings, these filters block all other wavelengths of light except for their respective narrowband wavelengths, enhancing contrast and detail in your images. light pollution or increase the object’s brightness. In many cases, they increase the contrast between nebula and night sky, not brightening the nebula.
-
EFW 7×36 II (new)
ر.ع.121.800Original price was: ر.ع.121.800.ر.ع.60.000Current price is: ر.ع.60.000. Add to cartEFW 7×36 II (new) Electronic Filter Wheel
The new 36mm EFW (Electronic Filter Wheel) independently developed by ZWO for astronomical mono cameras. With the larger body and the newly-added screw holes on the covers, it will give a much easier and more fixable way to connect to ASI cameras.
There are 7 slots inside the electronic filter wheel and we recommend you use the ZWO 36mm LRGB and SHO filter set with it.
The body is CNC milled from an aircraft graded aluminum block. It is made with high quality and thin with the thickness of only 20mm. The heart of the EFW uses the quality stepmotors produced by NPM, Japan, which can be very trustworthy. When photographing, you can rotate the EFW in both counter clockwise or clockwise direction for filter selection. The whole operation process is rather convenient and efficient.
-
CEM40EC with Hard Case and LiteRoc Tripod
ر.ع.1628.700 Add to cartThe iOptron® CEM40EC mount is the next generation of center-balanced equatorial mounts. This mount is incredibly eye-pleasing, and its beauty is found in more than its appearance. The functionality of the mount is superb. Weighing in at only 17.4lbs., this mount can support a payload of up to 40lbs.
-
Portable Cloud Sensor
ر.ع.173.000 Add to cartA battery powered cloud sensor, perfect for those expeditions to dark-sky sites and star parties!
-
SBIG STC-7
ر.ع.1396.740 Add to cartSBIG STC-7 Scientific CMOS Imaging Camera with built-in filter wheel. This is a complete imaging package – just add telescope! LRGB and narrowband filters are included.
-
GEM45EC German equatorial mount
ر.ع.1202.000 Add to cartThe GEM45EC mount utilizes a high-resolution encoder that delivers a PE <0/25 arcsecond rms. This iOptron German Equatorial mount ties contemporary technology and a classic mount design together in a lightweight and compact package that is sure to please observers and astrophotographers. Comes with iPolar, hard case, and tripod.
-
New 2-in Narrowband Filter OIII 7nm
ر.ع.101.400Original price was: ر.ع.101.400.ر.ع.60.000Current price is: ر.ع.60.000. Add to cartThe ZWO narrowband O-III 7nm filter is designed for nebula observation allowing the 7nm bandwidth of light centered on a wavelength of 500nm
-
CEM40EC with Hard Case
ر.ع.1419.000 Add to cartThe iOptron® CEM40EC mount is the next generation of center-balanced equatorial mounts. This mount is incredibly eye-pleasing, and its beauty is found in more than its appearance. The functionality of the mount is superb. Weighing in at only 15.8lbs., this mount can support a payload of up to 40lbs.
-
T2 Camera Tilt Adjuster
ر.ع.14.700 Add to cartProduct Usage:
Mainly used to reduce newton ring when imaging ha-solar;
Also used to adjust the camera imaging plane by rotating the six nuts in the main body when the sensor plane is uneven.
-
Wide 48mm Micro 4-3 T-Mount for Olympus – Space Gray
ر.ع.12.370 Add to cartThis precisely-machined T mount from William Optics is engineered for Olympus Micro-4/3 cameras. It includes a large 48mm thread to help secure imaging accessories to the T Mount and onto the Olympus camera. Space Gray finish
-
CEM120 EC
ر.ع.2871.000 Add to cartRecognizing the growing demand for an accurate and stable, equatorial mount with the versatility to carry larger instruments and more complex imaging arrays, we created the iOptron CEM120EC.
-
CEM120 EC2
ر.ع.3543.500 Add to cartRecognizing the growing demand for an accurate and stable, equatorial mount with the versatility to carry larger instruments and more complex imaging arrays, we created the iOptron CEM120EC.
-
GEM45 mount head
ر.ع.944.300 Add to cartUtilizing experiences gained during development of our CEM series, we were able to remove unnecessary bulk giving the GEM45 an incredible 2.8 payload to mount weight ratio. This compact 15.8lb mount can precisely GOTO an object and track with up to 45lbs of gear onboard. With its integrated electronic polar scope (iPolarTM), polar alignment is a snap, even when the pole star is obscured.
-
CEM120
ر.ع.1760.900 Add to cartRecognizing the growing demand for an accurate and stable, equatorial mount with the versatility to carry larger instruments and more complex imaging arrays, we created the iOptron CEM120. It offers the benefits of our revolutionary “center balance” design: stability, accuracy, and smooth mechanical operation, while capable of carrying a payload up to 115 lbs (52 kg).
-
Flattener 68III
ر.ع.254.620 Add to cartThis high-quality flattener has been engineered and CNC machined for usage with our FLT 132, 102GTS and other APO refractors.

















